Daniel Defense DD new 10.3" Mk18 barrel
10.3" 5.56MM, CARBINE, 1:7, GOV
This is a new Danie Defense barrel, direct from the factory. No gas block, not drilled for gas block, but ready for a Mk12 gas block, or your choice of gas blocks.
Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.
All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and highest quality exterior coating. These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.
|Manufacturing # / SKU||10.3"_Carbine_GOV_Barrel|
|Manuf. Process||Cold Hammer Forged|
|Muzzle Thread||1⁄2×28 TPI (Threads Per Inch)|
|Material||Chrome Moly Vanadium|
|Outside Finish||Mil-Spec Heavy Phosphate|
|Gas System||Carbine Length|
|Diameter At Gas Port||.750″|
All NFA laws apply. If you are uncertain if you can own this, check federal National Firearms Act, also with your state authorities. I am not your lawyer. You need to make sure you can own it.
Note: All ITAR regulations apply. Charlie's deals in the real McCoy. Your item most likely has parts that cannot be shipped outside of the USA, or owned in the USA by non-US Persons. You take accountability to safeguard parts and the entire upper, and get necessary approvals to transport outside of the USA.