This stock is specifically made for the M40A3 rifle, and as such, anticipates the use of the Remington 700 SA, and Badger M5 bottom metal, and has no cuts for front embedded rails for laser range finders. It is made to be 100% clone correct. This is a special order item from McMillan, and Charlie's brings to you direct from the manufacturer. The A4 stock is on the McMillan website for a little less money, but is a painted exterior. This product has the color throughout the resin, which was a Marine requirement. I guess, so that when the stock is scratched, the color remains, and is not a white scratch. While the stocks ships to you in olive green, you will see pictures in the wild with operators who have rattle canned the stock, barrel, optic and suppressor with tan and black and many other colors.
All service M40A3s are based upon the A4 Tactical rifle stock, a match grade fiberglass rifle stock made by McMillan and cast molded in an OD Green color. The action is glass bedded into the stock with aluminum pillars, while the barrel is allowed to "float" (it is attached only to the action). The stock has adjustable length-of-pull (through a buttstock spacer system) and a Marine specified adjustable saddle-type cheek piece, which McMillan now only provides to customers asking for the military clone correct model, here, which Charlie's provides. The stock also has six mount flush cups, two on each side front and back and one each on the front and rear underside. One bipod stud is located on the underside of the foreend.
In the service life of the M40A3, the rifle began with the DD Ross bottom metal, and then changed to Badger. The DD Ross bottom metal, also called trigger guard, housed an internal magazine with a trap door at the bottom. Some might call this model the M40A3 Mod 1. Not sure, but that would make sense. The Marine Corps actually did not change the official designation when the trigger guard changed. Some might argue, and be also correct that the M40A5 first started with the Badger trigger guard and no forward rail. So, this configuration might also call this model the M40A5 Mod 0. We have heard it both ways. Dan Ross (DD Ross Co.) swears that the M40A3 all had his trigger guards, and McMillan tells us that the M40A3 had both.
What is important for you, the customer, to understand is that this model here will only accept the Badger M5 detachable magazine.
-Same specs as a M40A3 replica stock with sniper fill with green embedded in the resin
-Large square and flat fore end capable of handling a bipod spigot
-Vertical grip with thumb-shelf, putting shooter's hand in the most comfortable and relaxed position
-Texture on fore end and grip for positive gripping surface
-Butt hook on buttstock provides superior control and maneuverability when lying prone for bench shooting with the off-hand
-Ready for Badger M5 trigger guard
Manufacturer's Part Number: A4-S700-USMC-O/A3
Note on condition: This stock is prepared in the exact same manner in which McMillan produced these stocks for the Marine Corp PWS armorers at Quantico. That is good and bad. Well, really, it is 100% good. The resin is fully stained throughout, so this is not painted over. The nature of the process will also show some odd colors here and there in the stock. Sometimes a dark green, sometimes a black, and this is normal. Also, there might be surface scratches that you would not see with a fine weapon, make for presentation. At Charlie's we do not know the process that McMillan undertakes, but their explanation to us is that "this is the PWS got the stocks originally." So, for those familiar with the M40, you will know this, and see this as genuine and love it. For the person looking for a trophy gun, you might think it is an imperfection. It is not.
We get these stocks on a regular basis, and they come to us direct from McMillan, and we sent them directly to you. If there is a problem, other than cosmetics, pay attention to our return policy for the timelines to make a return. If it is cosmetic, we do not accept returns as defective. For any other matter, you should address your concern to McMillan. We are the dealer in this case, and have not altered the stock at all.
To add bipod chick here: Harris Bipod for USMC M40 rifle
For reference material on how to assemble an M40A3 USMC sniper rifle, see this article from Rifleshooter.
Assembling an M40 rifle requires specialized skill from a gunsmith. Charlie's does not offer gunsmithing services to assemble your rifle, but ask our knowledgeable team members about the parts you might need, including the scope, mount for the scope and even a suppressor. Charlie's either has, or will have all the parts, and if you have not picked out a gunsmith, we can probably point you to a few that do great work.
The United States Marine Corps has had an M40 sniper rifle since the 1960s, so the devotion to military clone enthusiast is extremely high. Development of the A3 version began in 1996, and concluded in 2001. The M40A3 Sniper Rifle served as the primary sniper rifle of the US Marines from 2001 through about 2009 when it began to be replaced by the M40A5, and later the M40A6 and the Mk13 Mod7. USMC MARSOC and Scout Snipers carried the M40A3 in every clime and place, throughout the Global War on Terror and in other hot spots around the globe.
The M40A3 is based upon a McMillan A4 stock, with OD green color deep throughout the resin, and a Remington 700 Short Action, generally trued by 2112 Marine Corps armorers, often at Quantico. The bottom metal began as the DD Ross steel bottom metal and trigger guard, and in 2007, Badger M5 began to replace the heavier DD Ross setup. DD Ross also built the top rail for the scope mount with 30 MOA of cant.
Barrels have typically been Schneider stainless 610 24" barrels with a 1:12 twist and 6 grooves. Schneider makes an M40 profile barrel which tapers gently to less than 1" at the muzzle end, and has a straight run for the chamber and a few inches beyond. Unlike the successor M40A5, the M40A3 rifle barrel did not have a muzzle device, but a match grade crowned muzzle. The M30A3 was not designed to be used with a suppressor.
The scope is the S&B 3-12x50 with a GenII Mildot reticle, held by Badger Ordnance specific steel rings with 34mm tube diameter, and an extra large front ring with six screws. The bipod is the Harris BPMS 6-9", which is found on a myriad of US military sniper rifles.
The M40A3 is a bolt-action 7.62mmx51mm sniper rifle used by United States Marine Corp, including Scout Snipers and MARSOC.
The M40A3 is based around the design of the Remington model 700. It features a heavy floating barrel and is typically used with 175 gr. M118LR ammunition.
If you wish to add a PGW front laser platform, you should buy the M40A5 stock, but build your rifle and barrel to A3 standards.
Charlie's also has an M40A3 stock for the DD Ross lever style bottom metal
Assembling an M40 rifle requires specialized skill from a gunsmith. Charlie's does not offer gunsmithing services to assemble your rifle, but ask our knowledgeable team members about the parts you might need, including the scope, mount for the scope and even a suppressor. Charlie's either has, or will have all the parts, and if you have not picked out a gunsmith, we can probably point you to a few that do great work.
Note to Buyer: We are selling this as it comes new from McMillan, in the box, made to M40A3 spec. What this means is that the inletting is done to spec, but with the expecation that some small adjustments for fit for the metal parts is quite normal. There could be a small variation in cut that require the skill of a craftsman to fit this as a rifle. It should not be a DIY project, but it could be. Be aware of what you are buying and it is not a fit the legos together and rock and role situation. You also should expect that major interfaces like the screw holes and pillars are in the correct position. We will not take back as defective small scratches (this is a military stock) or imperfections in fit of bottom metal, etc.
If you can add to cart, that means our inventory tells us we have it available to ship. That is correct 95% of the time. If we are off, we will let you know. Our goal is to have all M40A3 and M405 parts in stock every day. If we are out of stock, we have more coming, as we place orders months and months in advance to further the goal of being your one stop shop for M40A3/A5.
This means scopes as well.
Badger Ordnance
Badger Ordnance
Badger Ordnance
Badger Ordnance