null

Daniel Defense DD 14.5" Carbine M4 barrel, stripped

MSRP: $339.00
$299.00
(You save $40.00 )
SKU:
DD0180240
UPC:
852548002363
Availability:
ships from our workshop in 3 to 5 days

Daniel Defense DD 14.5" Carbine  M4 barrel virgin

this is a perfect barrel for a Block 2 M4A1 build

This is a new Danie Defense barrel, direct from the factory.  No gas block, not drilled for gas block, but ready for a Mk12 gas block, or your choice of gas blocks.

The M4A1 rifle came with both this M4 Government profile as well as the heavier SOCOM profile.  Daniel Defense barrels have a similar quality to the originial Colt M4 barrels, which are getting harder to find.  Both are accurate, chrome-lined Chrome-Moly phosphated barrels.  The Daniel Defense barrel is cold hammer forged, while the Colt is button broached.

Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.

All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and highest quality exterior coating. These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

 

ADDITIONAL INFORMATION

Manufacturing # / SKU 07-075-18024-018
Restricted Shipping No
Caliber 5.56mm NATO
Barrel Length 14.5
Manuf. Process Cold Hammer Forged
Twist Rate 1:7
Muzzle Thread 1⁄2×28 TPI (Threads Per Inch)
Material Chrome Moly Vanadium
Outside Finish Mil-Spec Heavy Phosphate
Inside Finish Chrome
Gas System Carbine Length
Diameter At Gas Port .750″
Barrel Extension M4
Profile Government
Weight 1.6 lb
Manufacturer Daniel Defense

 

All NFA laws apply.  If you are uncertain if you can own this, check federal National Firearms Act, also with your state authorities.  I am not your lawyer.  You need to make sure you can own it.

Note:  All ITAR regulations apply.  Charlie's deals in the real McCoy.  Your item most likely has parts that cannot be shipped outside of the USA, or owned in the USA by non-US Persons.  You take accountability to safeguard parts and the entire upper, and get necessary approvals to transport outside of the USA.