FN 509 Tactical 9mm pistol, FDE

MSRP: $1,049.00
$989.00
(You save $60.00 )
SKU:
FN059010

FN 509® Tactical

Suppressor and Red Dot / RMR Ready

The FN 509® Tactical, an extension of the FN 509 family, is based on FN’s submission pistol that the U.S. Army tested for its Modular Handgun Trials, but includes the significant improvements to the design that were implemented in the FN 509.

The pistol features the company’s patent-pending Low-Profile Optics Mounting System™ that enables the platform to accept more than ten commercially-available miniature red dot (MRD) optics that co-witness with the suppressor-height night sights and remain adaptable to future optics releases with no requirement of direct milling of the slide.

The slide cap, for use when not shooting with an optic, has raised sight wings that protect iron sight alignment if the pistol is dropped or jostled, and provides a textured ramp for racking the slide against a belt loop, pant pocket or boot.

An FN-signature 4.5-inch, cold hammer-forged, stainless-steel barrel with target crown, ½” x 28 threads that accept the bulk of 9mm suppressors available and thread cap with integrated O-ring to prevent loosening during use complete the top end.

Lastly, the 24-round magazines, nearly identical in length to the pistol’s slide, maximize ammunition capacity without impacting carry convenience.

 

The FN 509 Tactical and the FN Low-Profile Optics Mounting System are another leap forward in the optics-ready pistol market.  FN set the trend for factory optics-ready pistols with the release of the FNP-45 Tactical nearly a decade ago and we’re set to do it again with this release. From barrel to base plate, the FN 509 Tactical really is the ultimate tactical pistol.

The FN 509 Tactical, an extension of the FN 509 family, is based on FN’s submission pistol that the U.S. Army tested for its Modular Handgun Trials, but includes the significant improvements to the design that were implemented in the FN 509. Like the optics mounting system, FN’s team of engineers set out to develop the ultimate tactical pistol by addressing the market’s existing limitations.

As a result, the FN 509 Tactical features an FN-signature 4.5-inch, cold hammer-forged, stainless-steel barrel with target crown, ½” x 28 threads that accept the bulk of 9mm suppressors available and thread cap with integrated O-ring to prevent loosening during use. Lastly, the 24-round magazines, nearly identical in length to the pistol’s slide, maximize ammunition capacity without impacting carry convenience.

The optics mount accepts the majority of MRD’s on the market with no need to direct mill the slide, allowing for a low-profile mount and co-witness with the suppressor-height iron sights. The slide cap, for use when not shooting with an optic, has raised sight wings that protect iron sight alignment if the pistol is dropped or jostled, and provides a textured ramp for racking the slide against a belt loop, pant pocket or boot.

SPECS

  • CALIBER: 9mm
  • OPERATION: Double-action
  • MAG CAPACITY: 10 or 17/24 Rd.
  • WEIGHT: 27.9 oz.
  • BARREL LENGTH: 4.5"
  • OVERALL LENGTH: 7.9"
  • TWIST RATE: 1:10" RH
  • HEIGHT: 5.75"
  • WIDTH: 1.35"
  • TRIGGER PULL: 5.5 - 7.5 lb.
  • SIGHT RADIUS: 5.79"

PRIMARY FEATURES

  • Striker-fired autoloader
  • 5.5 to 7.5 lbs. Trigger pull
  • FN Low Profile Optics Mounting System™
  • Threaded Barrel
  • Suppressor Height Night Sights

SLIDE

  • FN Low Profile Optics Mounting System™
  • Sight Protecting Slide Cap
  • External extractor; loaded chamber indicator

BARREL

  • Cold hammer-forged stainless steel
  • Recessed target crown
  • Polished chamber and feed ramp
  • 1/2” x 28 threaded Barrel
  • O-Ring retention thread cap

FRAME

  • Enhanced grip texture which enables faster follow-up shots in all conditions
  • Interchangeable backstraps
  • MIL-STD-1913 accessory mounting rail

OPERATING CONTROLS

Fully ambidextrous slide stop lever
and magazine release

MAGAZINE

High visibility, low-friction follower;
polymer base with black finish

 

SHIPS WITH

  • Two interchangeable backstraps
  • One 17-round and two 24-round magazines or Three 10-round magazines
  • Owner’s manual
  • Locking device
  • FN logo soft pistol case

 

Buying and shipping through Charlie’s is easy, but there is some information you need to know. This item must ship to FFL holder. No civilian exceptions.

       1)  Check your state laws to make sure the federally regulated item you want to purchase is legal in your state.

       2)  Find your FFL… Have your dealer send us a copy of their FFL to Charlie’s (Make them earn their fee!!!)

       3)  Be patient! You should hear from our compliance department within 3-4 business days. If not, feel free to reach out for a status update.

 

That’s it! We try to make this process as simple as possible for our customers. Please click the “Buying a Firearm” tab at the top of this page for more information.

 

California and New York residents please, click here. The process may be different due to state specific laws.

charlie-s-ffl.png 

THIS IS A SERIALIZED FIREARM.  It must ship to a Federal Firearms License holder.  No civilian exceptions.

Buying and shipping through Charlie’s is easy, but there is some information you need to know. Only a federally licensed firearms dealer may receive a firearm or federally regulated serialized item (like a receiver or suppressor). We cannot ship these items directly to you. Please follow these steps to process your transaction:

1)     Check your state laws to make sure the federally regulated item you want to purchase is legal in your state. Your FFL dealer should be able to give you all of the necessary information regarding your state specific laws. But, if we ship to your FFL, and there is a legal issue, we cannot accept a return. So please make sure that you know and follow your local and state laws.

 

2)     A quick google search will show you what Federal Firearms Licensed (FFL) dealers are in your area. When you are ready to purchase, contact the FFL dealer you would like to use and get their shipping address. During the check-out, put YOUR address in the “billing” section and the FFL DEALER’S address in the “shipping” section. If you don’t know your FFLs address, that’s okay. You can send the information later.

 

3)     After check out, make sure to contact your FFL dealer to ensure they will receive your shipment for you (most do this for a small fee, but you should always double check).

 

4)     Have your dealer send us a copy of their FFL to FFL@CharliesCustomClones.com. Charlie’s does not reach to your FFL (MAKE THEM EARN THEIR FEE!!!)

 

5)     Be patient! In order to ensure we remain compliant with all federal laws, our compliance department is kept separate from our sales and operations team. Please allow a few days for our compliance officer to verify all of your dealer’s documents and ensure all federal laws are being observed. You should hear from our compliance department within 3-4 business days. If not, feel free to reach out for a status update.

 

That’s it! We try to make this process as simple as possible for our customers, but if you are unfamiliar the process or have any other questions, please visit our How to Buy a Firearm page for more details.

California and New York residents please, click here. The process may be different due to state specific laws.

NOTE: The free shipping option does not apply to full rifles, unless purchased with a riflescope.  If you choose free shipping at check-out, we will bill you for shipping later.