Daniel Defense DD 16" mid-length Gov't (or lightweight) Profile barrel assembly kit
16" 5.56MM, MID-LENGTH, 1:7, GOV
Condition: New, take-off
Cold Hammer Forging of barrels has been known for decades to produce the most accurate, longest lasting rifle barrels obtainable. The Cold Hammer Forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. During the hammering process, a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber, the lands, and the grooves. In addition to the aforementioned benefits, the Cold Hammer Forging process creates a defect free bore and the most consistent chamber possible.
|Manufacturing # / SKU||16"_Mid-Length_GOV_Barrel|
|Manuf. Process||Cold Hammer Forged|
|Muzzle Thread||1⁄2×28 TPI (Threads Per Inch)|
|Material||Chrome Moly Vanadium|
|Outside Finish||Mil-Spec Heavy Phosphate|
|Diameter At Gas Port||.750″|
All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and highest quality exterior coating. These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.
Note: This is a factory new barrel assembly, which included the low-profile gas block, gas tube and barrel nut. The assembly has been recently removed from a complete DD upper assembly by professionals at Potomac Armory, without scratch marks, and is made available by Charlie's as a special arrangement. pictures may be stock photos.
- CHF barrel, 16" mid-length gas system with threaded muzzle
- low profile DD gas block, pinned to barrel (can be removed)
- mid-length gas tube
- DD RIS-II barrel nut
- no flash hider is included