No pop on first shot. Oculus does not disappoint. You might have to hold a banner high. Sounds like a political campaign. No Pop on First Shot... No noticeable first round pop in the long configuration.
Rugged has made the Oculus with the same precision as their other modular cans. ADAPT Modular Technology allows the Oculus 22 to have two configurations, so that you can have a shorter and lighter suppressor in seconds compared to months. The Oculus 22 features class leading suppression and no first round pop in the standard configuration. The Rugged Oculus can be configured in full mode at 5.5", or in K-mode at a mere 3.25". The ADEPT modular technology allows for fast swap between full and kurtz lengths. The Oculus22 provides class leading suppression with 2 configurations in one suppressor. Being constructed of 100% Stainless Steel allows more cleaning solutions and unmatched durability.
FEATURES
Configurable from 3.25" to 5.25" in length
Weighs as little as 4.3 oz.
Supports: 22 LR, 22 WMR, 17 HMR, 17 WSM, 5.7x28mm
User Serviceable
No first round pop
1.06" diameter allows for a slimline and under the rail mount, where needed
Stainless steel construction with high temperature Cerakote finish
Removable front cap
Impressive sound reduction: as low as 112.3 db with full-size pistol, ranging to 125.2 for pistol in K mode
Standard Configuration: 5.25″, Short Configuration: 3.25″
Diameter
1.06″
Weight
Standard Configuration: 6.9oz; Short Configuration: 4.3oz
Barrel thread
1/2" - 28
Material
Entirely 17-4PH Stainless Steel
Description
ADAPT™ Modular Technology allows the Oculus22 to have two configurations, so that you can have a shorter and lighter suppressor in seconds compared to months.
Engineered Silence™
Oculus22 baffles are machined from 17-4 Stainless Steel barstock, with indexing tabs for repeatable return to zero after user servicing. The Oculus22 uses slotted baffles that create a gas seal to prevent carbon and gas build up between the tube and baffles for ease of disassembly.
No First Round Pop
The Oculus22 features class leading suppression and no first round pop in the standard configuration.
Revolutionary Mounting System
We strategically place the engraving on the thickest cross section of the 17-4 stainless steel mount for fast and easy replacement should the suppressor become damaged beyond repair, it also serves to make the Oculus22 infinitely upgradeable in the future.
Extreme Durability
With cleaning and durability in mind the entire Oculus22 is machined from 17-4 Stainless Steel barstock. This gives you the ability to use practically any cleaning method with each and every part of the Oculus22.
Belt Fed Rated
Due to superior machining and materials the Oculus 22 is Belt Fed Rated for .22lr and full-auto rated for 22 WMR, 17 HMR, 17 WSM and 5.7x28mm.
Specifications
DIAMETER: 1.06″ LENGTH: Standard Configuration: 5.25″, Short Configuration: 3.25″ WEIGHT: Standard Configuration: 6.9oz; Short Configuration: 4.3oz FINISH: Cerokote
Buying and shipping through Charlie’s is easy, but there is some information you need to know. This item must ship to FFL holder. No civilian exceptions.
1) Check your state laws to make sure the federally regulated item you want to purchase is legal in your state.
2) Find your FFL… Have your dealer send us a copy of their FFL and SOT to Charlie’s (Make them earn their fee!). Not every FFL is a SOT or Class 2 / Class 3 dealer.
3) Be patient! You should hear from our compliance department within 3-4 business days. If not, feel free to reach out for a status update.
That’s it! We try to make this process as simple as possible for our customers. Please click the “Buying a Firearm” tab at the top of this page for more information.
THIS IS A SERIALIZED ITEM. It must ship to a Federal Firearms License holder. No civilian exceptions.
Buying and shipping through Charlie’s is easy, but there is some information you need to know. Only a federally licensed firearms dealer may receive a firearm or federally regulated serialized item (like a receiver or suppressor). We cannot ship these items directly to you. Please follow these steps to process your transaction:
1)Check your state laws to make sure the federally regulated item you want to purchase is legal in your state. Your FFL dealer should be able to give you all of the necessary information regarding your state specific laws. But, if we ship to your FFL, and there is a legal issue, we cannot accept a return. So please make sure that you know and follow your local and state laws.
2)A quick google search will show you what Federal Firearms Licensed (FFL) dealers are in your area. When you are ready to purchase, contact the FFL dealer you would like to use and get their shipping address. During the check-out, put YOUR address in the “billing” section and the FFL DEALER’S address in the “shipping” section. If you don’t know your FFLs address, that’s okay. You can send the information later.
3)After check out, make sure to contact your FFL dealer to ensure they will receive your shipment for you (most do this for a small fee, but you should always double check).
4)Have your dealer send us a copy of their FFL to FFL@CharliesCustomClones.com. Charlie’s does not reach to your FFL (MAKE THEM EARN THEIR FEE!!!)
5)Be patient! In order to ensure we remain compliant with all federal laws, our compliance department is kept separate from our sales and operations team. Please allow a few days for our compliance officer to verify all of your dealer’s documents and ensure all federal laws are being observed. You should hear from our compliance department within 3-4 business days. If not, feel free to reach out for a status update.
That’s it! We try to make this process as simple as possible for our customers, but if you are unfamiliar the process or have any other questions, please visit our How to Buy a Suppressor page for more details.
