Sig Sauer P320 M17 Commemorative 9mm military pistol

$1,122.00

Brand: Sig Sauer
Product Type: Pistol (FIREARM)


Product Description

Sig Sauer P320 M17 9mm pistol - Commemorative Edition

Sig Sauer M17 at Charlies Custom Clones

This is a commemorative edition, limited to 5,000 pistols.

The M17-Commemorative pistol shares the same components, coatings, and markings as the firearm that was awarded the U.S. Army contract for the modular handgun system (MHS).

Only 5,000 M17-Commemorative Edition pistols have been produced for sale, and each SIG SAUER M17-Commemorative pistol is serialized M17-0001 through M17-5000 and includes the Army’s required unique identifier (UID). The M17 is sold in the same cardboard packaging as delivered to the U.S. Army. From the pistol to the packaging, the M17-Commemorative Edition is identical to the U.S. Army’s official M17 service pistol.

“The U.S. Army’s selection of the M17 earned the SIG SAUER P320 a place in history. It’s regarded as one of the world’s most influential firearms as it enters service with America’s Armed Forces across the globe,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, SIG SAUER, Inc.

“The M17 is the culmination of SIG SAUER’s steadfast commitment to providing the military with the very best, and our determination to never settle. We are excited that collectors and civilians have an opportunity to participate in this history.”

Upon registration of the M17-Commemorative pistol, the purchaser will receive an official certificate of authenticity and commemorative challenge coin, both with serial numbers matching the purchased M17-Commemorative pistol.

The M17-Commemorative is a 9mm, striker-fired pistol, and comes with two 21-round magazines and one 17-round magazine. The pistol features a coyote-tan PVD coated stainless steel slide with the same optic cut as specified by the MHS contract, coyote-tan colored controls just like the original pistols shipped to the 101st Airborne, and a manual safety. The M17 is equipped with a SIGLITE front night sight and removable Night Sight rear plate. The M17-Commemorative comes with a coyote-tan carry-length grip module.

The M17-Commemorative Specs:

  • Total length: 8″
  • Barrel length: 4.7″
  • Weight (including 17rd magazine): 29.6 oz
  • Height: 5.5″
  • Width: 1.3″
  • Sight radius: 6.6″

MSRP M17-Commemorative Edition Pistol: $1,122.00

The M17-Commemorative is shipping to stores in August 2018.

To complement the M17-Commemorative, an exclusive M17 Collector’s Case is available for purchase separately at sigsauer.com/store.  The case is a solid cherry box, with dark mahogany stain, a tempered glass top, a brushed nickel latch, and a keyhole back for optional wall-hanging.  The M17 Collector’s Case features a slate-grey flocked foam insert with an affixed US Army logo, and precision laser placement cuts for the M17 pistol, the official serialized M17-Commemorative Certificate of Authenticity, and the serialized M17-Commemorative Challenge Coin.

 


 

Caliber 9mm
Manufacturer Sig Sauer
Trigger Pull SA Approx 5.0 lb
Overall Length Approx 8.0 in
Overall Height Approx 7.9 in
Overall Width Approx 1.3 in
Sights (detailed) SIGLite night sights / removable rear optic plate
Weight Empty Approximately 27 oz
Frame Finish Coyote tan / Black
Frame Material Polymer
Slide Finish Coyote tan / Black
Barrel Length (in) 3.7 in
Mag Capacity / Rounds 17rd
Number of Mags 2
Accessory Rail Yes
Safety (detailed) Thumb safety
Magazine Well No
FFL Requirements Must be shipped to FFL dealer for transfer.

 

NOTE:  MUST READ FOR FIREARM AND LOWER RECEIVER ORDERS: 

THIS IS A SERIALIZED FIREARM.  IT MUST SHIP TO AN Federal Firearms License holder.  No civilian exceptions.

When you check-out:  We no longer take PayPal, as it has caused some confusion on the purchase of firearms, which is contrary to PayPal policies, and we had no way to retrict it  just for FFL items.  

A firearm cannot be sent directly to you.  I am sure you know this, but for the fake-news reading this, who might think that a firearm can be mailed to a buyer, I have to reiterate:  A firearm or federal regulated serialized item (like a receiver or suppressor), only a federally licensed firearms dealer may receive such an item. It would be good to know your FFL and their shipping address before purchasing.  If you know the FFL address, please put this in your shipping address at check-out.  Any deviation from this, and your order could be delayed.  Sorry, have to have strict controls here.  We have a very manual process to reconcile orders to FFL transfer agents.  The easier you make it for us, the less likely your order will be held-up.  This is a highly regulated process, and compliance is monitored and enforced by the ATF.

Also your FFL must contact us by email, and send us a scanned copy of their firearms license.  We prefer a .pdf copy, and not a .jpg.  This is your responsibility to obtain and have emailed to us, or snail mail.  We do not have a fax machine.  Best practice is for your FFL to note your name and order number in the email header.  We will not follow-up with your FFL.  They should send to:  FFL@charliescustomclones.com .  If you forget, you can email us at the return address of any of the order confirmations that you receive.

Note:  California residents, click here for CA compliant processing.  This will also work for New York residents.  We will act on your behalf and instructions to ship to restrictive states, but ultimately, it is your responsibility to know the local and state laws.  We are in Virginia, and cannot, and do not know all the nuances of other states.  If we ship to your FFL, and there is an issue, we cannot accept a return, so please make sure that you know and follow your local and state laws.

Please note our shipping timelines.  We do not ship immediately.  Also, if you choose the free 5-7 day shipping, those orders ship after all other forms of shipping chosen.  Express shipping is given priority. 

Be sure to read our return policy.  While your satisfaction is our primary concern, we are limited in a highly regulated business environment by what we can and cannot do, and the number of local, state and federal regulations.  We do not accept returns for ammunition and firearms, other than obvious defects.  Your gun dealer or transfer agent is responsible for inspection for defects: 

Charlie's shipping and return policy