null

Nightforce X-Treme Duty Ultralite Alloy Rings 1.5" 4 Screw Slim - 30mm or 34mm, Black

$170.00 - $190.00
SKU:
NF0127999
Availability:
ships from our shop in 3 to 5 days (+/-)

Nightforce X-Treme Duty Ultralite Titanium Alloy Slim Rings with 4 Screws - Black

Offered in both 30mm and 34mm at 1.5" high

Rings are a good answer over a mount when either you have a bolt action gun, that has a fair amount of real estate and the placement of the scope can be customized. Also, with ultra short variations of scopes with very little room on the turret, a good set of rings can make mounting easy.

While these Nightforce rings are lightweight, they are built tough. The 4-screw design allows for a slim profile, and fits perfectly on ultra short style scopes.

How do you choose how high your rings should be? A general rule of thumb is that on a rifle platform with a Picatinny rail under the front of the scope, you will need 1.45" for a high magnification scope with a 56mm objective lens. This is true for tactical bolt action rifles and all gas guns, like an AR-15 or SR25, AR-10, etc. For mounts with cant, or bias, you might need a little higher, so 1.5" is a good round number. These rings have no MOA cant, so a long range scope will fit nicely. If your scope has a smaller objective lens, you can go lower for bolt guns, but gas guns are optimized in the 1.35" to 1.50" without night vision. Adding night vision would require a higher mount, at least 1.7" and possibly as high as 2.04". For standard bolt gun platforms, lower heights can be used accordingly.

Machined from 7075-T6 aluminum with titanium jaws and cross bolts, these rings are available in 30mm or 34mm. At half the weight of steel rings, these hard anodized sets are much stronger than what is usually found in lightweight rings. The 4-screw variant is normal for most applications. For extreme duty using very high caliber rounds, the six-screw option might work better.

Rings are a good answer over a mount when either you have a bolt action gun, that has a fair amount of real estate and the placement of the scope can be customized. Also, with ultra short variations of scopes with very little room on the turret, a good set of rings can make mounting easy.

Comes as a set of two rings.

Manufacturer's Part Numbers:

1.5" high four screw Ultralite 34mm with 30mm tube: A203

1.5" high four screw Ultralite 34mm with 30mm tube: A227